dmesg - ASMFISH PENTIUM N4200
Linux version 4.10.0-42-generic (buildd@lgw01-amd64-007) (gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.5) ) #46~16.04.1-Ubuntu SMP Mon Dec 4 15:57:59 UTC 2017 (Ubuntu 4.10.0-42.46~16.04.1-generic 4.10.17)
Command line: BOOT_IMAGE=/vmlinuz-4.10.0-42-generic root=/dev/mapper/mint--vg-root ro quiet splash vt.handoff=7
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
x86/fpu: xstate_offset[3]: 576, xstate_sizes[3]: 64
x86/fpu: xstate_offset[4]: 640, xstate_sizes[4]: 64
x86/fpu: Enabled xstate features 0x1b, context size is 704 bytes, using 'compacted' format.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
BIOS-e820: [mem 0x0000000000059000-0x0000000000085fff] usable
BIOS-e820: [mem 0x0000000000086000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable
BIOS-e820: [mem 0x0000000010000000-0x0000000012150fff] reserved
BIOS-e820: [mem 0x0000000012151000-0x0000000068b94fff] usable
BIOS-e820: [mem 0x0000000068b95000-0x0000000068b95fff] ACPI NVS
BIOS-e820: [mem 0x0000000068b96000-0x0000000068bbffff] reserved
BIOS-e820: [mem 0x0000000068bc0000-0x000000007822efff] usable
BIOS-e820: [mem 0x000000007822f000-0x000000007aebefff] reserved
BIOS-e820: [mem 0x000000007aebf000-0x000000007afbefff] ACPI NVS
BIOS-e820: [mem 0x000000007afbf000-0x000000007affefff] ACPI data
BIOS-e820: [mem 0x000000007afff000-0x000000007affffff] usable
BIOS-e820: [mem 0x000000007b000000-0x000000007fffffff] reserved
BIOS-e820: [mem 0x00000000d3709000-0x00000000d370afff] reserved
BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
NX (Execute Disable) protection: active
e820: update [mem 0x6b81d018-0x6b82d057] usable ==> usable
extended physical RAM map:
reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
reserve setup_data: [mem 0x0000000000059000-0x0000000000085fff] usable
reserve setup_data: [mem 0x0000000000086000-0x00000000000fffff] reserved
reserve setup_data: [mem 0x0000000000100000-0x000000000fffffff] usable
reserve setup_data: [mem 0x0000000010000000-0x0000000012150fff] reserved
reserve setup_data: [mem 0x0000000012151000-0x0000000068b94fff] usable
reserve setup_data: [mem 0x0000000068b95000-0x0000000068b95fff] ACPI NVS
reserve setup_data: [mem 0x0000000068b96000-0x0000000068bbffff] reserved
reserve setup_data: [mem 0x0000000068bc0000-0x000000006b81d017] usable
reserve setup_data: [mem 0x000000006b81d018-0x000000006b82d057] usable
reserve setup_data: [mem 0x000000006b82d058-0x000000007822efff] usable
reserve setup_data: [mem 0x000000007822f000-0x000000007aebefff] reserved
reserve setup_data: [mem 0x000000007aebf000-0x000000007afbefff] ACPI NVS
reserve setup_data: [mem 0x000000007afbf000-0x000000007affefff] ACPI data
reserve setup_data: [mem 0x000000007afff000-0x000000007affffff] usable
reserve setup_data: [mem 0x000000007b000000-0x000000007fffffff] reserved
reserve setup_data: [mem 0x00000000d3709000-0x00000000d370afff] reserved
reserve setup_data: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
reserve setup_data: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
reserve setup_data: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
reserve setup_data: [mem 0x0000000100000000-0x000000017fffffff] usable
efi: EFI v2.50 by INSYDE Corp.
efi: ACPI 2.0=0x7affe014 ESRT=0x78767c58 SMBIOS=0x78765000 SMBIOS 3.0=0x78763000 MEMATTR=0x767aa018
SMBIOS 3.0.0 present.
DMI: Acer Swift SF113-31/ASAHI_AP, BIOS V1.06 06/26/2017
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x180000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 0000000000 mask 7F80000000 write-back
1 base 007C000000 mask 7FFC000000 uncachable
2 base 007B000000 mask 7FFF000000 uncachable
3 base 0100000000 mask 7F80000000 write-back
4 base 00FFC00000 mask 70FFC00000 write-combining
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0x7b000 max_arch_pfn = 0x400000000
esrt: Reserving ESRT space from 0x0000000078767c58 to 0x0000000078767c90.
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff9300c0080000] 80000 size 24576
Using GB pages for direct mapping
BRK [0x50c28000, 0x50c28fff] PGTABLE
BRK [0x50c29000, 0x50c29fff] PGTABLE
BRK [0x50c2a000, 0x50c2afff] PGTABLE
BRK [0x50c2b000, 0x50c2bfff] PGTABLE
BRK [0x50c2c000, 0x50c2cfff] PGTABLE
BRK [0x50c2d000, 0x50c2dfff] PGTABLE
RAMDISK: [mem 0x3d59e000-0x3fffafff]
Secure boot MOKSBState disabled
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x000000007AFFE014 000024 (v02 ACRSYS)
ACPI: XSDT 0x000000007AFCF188 000114 (v01 ACRSYS ACRPRDCT 00000003 01000013)
ACPI: FACP 0x000000007AFEE000 000114 (v06 ACRSYS ACRPRDCT 00000003 1025 00040000)
ACPI: DSDT 0x000000007AFD8000 00E9E0 (v02 ACRSYS ACRPRDCT 00000003 1025 00040000)
ACPI: FACS 0x000000007AFAC000 000040
ACPI: FACS 0x000000007AFAC000 000040
ACPI: BDAT 0x000000007AFFB000 000030 (v02 ACRSYS ACRPRDCT 00000000 1025 00040000)
ACPI: SSDT 0x000000007AFF4000 0054BB (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
ACPI: TPM2 0x000000007AFF2000 000034 (v03 ACRSYS ACRPRDCT 00000002 1025 00040000)
ACPI: DBGP 0x000000007AFF0000 000034 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
ACPI: HPET 0x000000007AFED000 000038 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
ACPI: APIC 0x000000007AFEB000 000084 (v03 ACRSYS ACRPRDCT 00000003 1025 00040000)
ACPI: NPKT 0x000000007AFE9000 000065 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
ACPI: WSMT 0x000000007AFE7000 000028 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
ACPI: SSDT 0x000000007AFD5000 002B24 (v02 ACRSYS ACRPRDCT 00000003 1025 00040000)
ACPI: SSDT 0x000000007AFD1000 00178B (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
ACPI: SSDT 0x000000007AFCE000 00072B (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
ACPI: SSDT 0x000000007AFCC000 00017C (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
ACPI: SSDT 0x000000007AFC8000 002760 (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
ACPI: DMAR 0x000000007AFEF000 0000A8 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
ACPI: UEFI 0x000000007AFFA000 000042 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
ACPI: DBG2 0x000000007AFF1000 000072 (v00 ACRSYS ACRPRDCT 00000003 1025 00040000)
ACPI: LPIT 0x000000007AFEC000 00005C (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
ACPI: PRAM 0x000000007AFE8000 000030 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
ACPI: SSDT 0x000000007AFD3000 00024A (v02 ACRSYS ACRPRDCT 00000003 1025 00040000)
ACPI: SSDT 0x000000007AFCD000 00032D (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
ACPI: FPDT 0x000000007AFC7000 000034 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
ACPI: UEFI 0x000000007AFFD000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: ECDT 0x000000007AFCB000 0000C1 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: SSDT 0x000000007AFF3000 000554 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
ACPI: SSDT 0x000000007AFD0000 000400 (v02 ACRSYS ACRPRDCT 00003000 1025 00040000)
ACPI: MCFG 0x000000007AFEA000 00003C (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
ACPI: WDAT 0x000000007AFC6000 000104 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
ACPI: BGRT 0x000000007AFD4000 000038 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
ACPI: NHLT 0x000000007AFC5000 00002D (v00 ACRSYS ACRPRDCT 00000002 1025 00040000)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000017fffffff]
NODE_DATA(0) allocated [mem 0x17ffd2000-0x17fffcfff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000017fffffff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000057fff]
node 0: [mem 0x0000000000059000-0x0000000000085fff]
node 0: [mem 0x0000000000100000-0x000000000fffffff]
node 0: [mem 0x0000000012151000-0x0000000068b94fff]
node 0: [mem 0x0000000068bc0000-0x000000007822efff]
node 0: [mem 0x000000007afff000-0x000000007affffff]
node 0: [mem 0x0000000100000000-0x000000017fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff]
On node 0 totalpages: 1007672
DMA zone: 64 pages used for memmap
DMA zone: 21 pages reserved
DMA zone: 3972 pages, LIFO batch:0
DMA32 zone: 7491 pages used for memmap
DMA32 zone: 479412 pages, LIFO batch:31
Normal zone: 8192 pages used for memmap
Normal zone: 524288 pages, LIFO batch:31
tboot: non-0 tboot_addr but it is not of type E820_RESERVED
Reserving Intel graphics memory at 0x000000007c000000-0x000000007fffffff
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 4 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
PM: Registered nosave memory: [mem 0x00086000-0x000fffff]
PM: Registered nosave memory: [mem 0x10000000-0x12150fff]
PM: Registered nosave memory: [mem 0x68b95000-0x68b95fff]
PM: Registered nosave memory: [mem 0x68b96000-0x68bbffff]
PM: Registered nosave memory: [mem 0x6b81d000-0x6b81dfff]
PM: Registered nosave memory: [mem 0x6b82d000-0x6b82dfff]
PM: Registered nosave memory: [mem 0x7822f000-0x7aebefff]
PM: Registered nosave memory: [mem 0x7aebf000-0x7afbefff]
PM: Registered nosave memory: [mem 0x7afbf000-0x7affefff]
PM: Registered nosave memory: [mem 0x7b000000-0x7fffffff]
PM: Registered nosave memory: [mem 0x80000000-0xd3708fff]
PM: Registered nosave memory: [mem 0xd3709000-0xd370afff]
PM: Registered nosave memory: [mem 0xd370b000-0xdfffffff]
PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff]
PM: Registered nosave memory: [mem 0xe4000000-0xfed00fff]
PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
PM: Registered nosave memory: [mem 0xfed02000-0xff7fffff]
PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
e820: [mem 0x80000000-0xd3708fff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 36 pages/cpu @ffff93023fc00000 s107992 r8192 d31272 u524288
pcpu-alloc: s107992 r8192 d31272 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
Built 1 zonelists in Node order, mobility grouping on. Total pages: 991904
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-4.10.0-42-generic root=/dev/mapper/mint--vg-root ro quiet splash vt.handoff=7
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 3787944K/4030688K available (9070K kernel code, 1667K rwdata, 3828K rodata, 2228K init, 2364K bss, 242744K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
NR_IRQS:524544 nr_irqs:1024 16
vt handoff: transparent VT on vt#7
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 99544814920 ns
hpet clockevent registered
tsc: PIT calibration matches HPET. 1 loops
tsc: Detected 1094.401 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 2188.80 BogoMIPS (lpj=4377600)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20160930
ACPI: 11 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 7 MCE banks
CPU0: Thermal monitoring enabled (TM1)
Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
Freeing SMP alternatives memory: 32K
ftrace: allocating 34227 entries in 134 pages
smpboot: Max logical packages: 1
DMAR: Host address width 39
DMAR: DRHD base: 0x000000fed64000 flags: 0x0
DMAR: dmar0: reg_base_addr fed64000 ver 1:0 cap 1c0000c40660462 ecap 7e3ff0505e
DMAR: DRHD base: 0x000000fed65000 flags: 0x1
DMAR: dmar1: reg_base_addr fed65000 ver 1:0 cap d2008c40660462 ecap f050da
DMAR: RMRR base: 0x0000007ae9c000 end: 0x0000007aebbfff
DMAR: RMRR base: 0x0000007b800000 end: 0x0000007fffffff
DMAR-IR: IOAPIC id 1 under DRHD base 0xfed65000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xfed65000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Pentium(R) CPU N4200 @ 1.10GHz (family: 0x6, model: 0x5c, stepping: 0x9)
Performance Events: PEBS fmt3+, Goldmont events, 32-deep LBR, full-width counters, Intel PMU driver.
... version: 4
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3
smp: Brought up 1 node, 4 CPUs
smpboot: Total of 4 processors activated (8755.20 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x68b95000-0x68b95fff] (4096 bytes)
PM: Registering ACPI NVS region [mem 0x7aebf000-0x7afbefff] (1048576 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 15:23:14, date: 12/26/17
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
PCI: Using configuration type 1 for base access
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI : EC: EC started
ACPI : EC: interrupt blocked
ACPI: \: Used as first EC
ACPI: \: GPE=0x2b, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \: Used as boot ECDT EC to handle transactions
ACPI: Executed 4 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF93023A1D3000 000102 (v02 PmRef Cpu0Cst 00003001 INTL 20130117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF93023A2B1E00 00015F (v02 PmRef ApIst 00003000 INTL 20130117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF93023A1C0180 00008D (v02 PmRef ApCst 00003000 INTL 20130117)
ACPI : EC: EC stopped
ACPI : EC: EC started
ACPI : EC: interrupt blocked
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x2b, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: Power Resource [FN00] (on)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x7c000001-0x7fffffff window]
pci_bus 0000:00: root bus resource [mem 0x7b800001-0x7bffffff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xcfffffff window]
pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:5af0] type 00 class 0x060000
pci 0000:00:00.1: [8086:5a8c] type 00 class 0x118000
pci 0000:00:00.1: reg 0x10: [mem 0x91210000-0x91217fff 64bit]
pci 0000:00:02.0: [8086:5a84] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io 0x1000-0x103f]
pci 0000:00:0e.0: [8086:5a98] type 00 class 0x040380
pci 0000:00:0e.0: reg 0x10: [mem 0x91218000-0x9121bfff 64bit]
pci 0000:00:0e.0: reg 0x20: [mem 0x91000000-0x910fffff 64bit]
pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold
pci 0000:00:0e.0: System wakeup disabled by ACPI
pci 0000:00:0f.0: [8086:5a9a] type 00 class 0x078000
pci 0000:00:0f.0: reg 0x10: [mem 0x9121e000-0x9121efff 64bit]
pci 0000:00:0f.0: PME# supported from D3hot
pci 0000:00:12.0: [8086:5ae3] type 00 class 0x010601
pci 0000:00:12.0: reg 0x10: [mem 0x9121c000-0x9121dfff]
pci 0000:00:12.0: reg 0x14: [mem 0x91235000-0x912350ff]
pci 0000:00:12.0: reg 0x18: [io 0x1080-0x1087]
pci 0000:00:12.0: reg 0x1c: [io 0x1088-0x108b]
pci 0000:00:12.0: reg 0x20: [io 0x1060-0x107f]
pci 0000:00:12.0: reg 0x24: [mem 0x91233000-0x912337ff]
pci 0000:00:12.0: PME# supported from D3hot
pci 0000:00:13.0: [8086:5ad8] type 01 class 0x060400
pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
pci 0000:00:13.0: System wakeup disabled by ACPI
pci 0000:00:13.2: [8086:5ada] type 01 class 0x060400
pci 0000:00:13.2: PME# supported from D0 D3hot D3cold
pci 0000:00:13.2: System wakeup disabled by ACPI
pci 0000:00:14.0: [8086:5ad6] type 01 class 0x060400
pci 0000:00:14.0: PME# supported from D0 D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:15.0: [8086:5aa8] type 00 class 0x0c0330
pci 0000:00:15.0: reg 0x10: [mem 0x91200000-0x9120ffff 64bit]
pci 0000:00:15.0: PME# supported from D3hot D3cold
pci 0000:00:15.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:5aac] type 00 class 0x118000
pci 0000:00:16.0: reg 0x10: [mem 0x9121f000-0x9121ffff 64bit]
pci 0000:00:16.0: reg 0x18: [mem 0x91220000-0x91220fff 64bit]
pci 0000:00:16.1: [8086:5aae] type 00 class 0x118000
pci 0000:00:16.1: reg 0x10: [mem 0x91221000-0x91221fff 64bit]
pci 0000:00:16.1: reg 0x18: [mem 0x91222000-0x91222fff 64bit]
pci 0000:00:16.2: [8086:5ab0] type 00 class 0x118000
pci 0000:00:16.2: reg 0x10: [mem 0x91223000-0x91223fff 64bit]
pci 0000:00:16.2: reg 0x18: [mem 0x91224000-0x91224fff 64bit]
pci 0000:00:16.3: [8086:5ab2] type 00 class 0x118000
pci 0000:00:16.3: reg 0x10: [mem 0x91225000-0x91225fff 64bit]
pci 0000:00:16.3: reg 0x18: [mem 0x91226000-0x91226fff 64bit]
pci 0000:00:17.0: [8086:5ab4] type 00 class 0x118000
pci 0000:00:17.0: reg 0x10: [mem 0x91227000-0x91227fff 64bit]
pci 0000:00:17.0: reg 0x18: [mem 0x91228000-0x91228fff 64bit]
pci 0000:00:17.1: [8086:5ab6] type 00 class 0x118000
pci 0000:00:17.1: reg 0x10: [mem 0x91229000-0x91229fff 64bit]
pci 0000:00:17.1: reg 0x18: [mem 0x9122a000-0x9122afff 64bit]
pci 0000:00:17.2: [8086:5ab8] type 00 class 0x118000
pci 0000:00:17.2: reg 0x10: [mem 0x9122b000-0x9122bfff 64bit]
pci 0000:00:17.2: reg 0x18: [mem 0x9122c000-0x9122cfff 64bit]
pci 0000:00:17.3: [8086:5aba] type 00 class 0x118000
pci 0000:00:17.3: reg 0x10: [mem 0x9122d000-0x9122dfff 64bit]
pci 0000:00:17.3: reg 0x18: [mem 0x9122e000-0x9122efff 64bit]
pci 0000:00:1c.0: [8086:5acc] type 00 class 0x080501
pci 0000:00:1c.0: reg 0x10: [mem 0x9122f000-0x9122ffff 64bit]
pci 0000:00:1c.0: reg 0x18: [mem 0x91230000-0x91230fff 64bit]
pci 0000:00:1e.0: [8086:5ad0] type 00 class 0x080501
pci 0000:00:1e.0: reg 0x10: [mem 0x91231000-0x91231fff 64bit]
pci 0000:00:1e.0: reg 0x18: [mem 0x91232000-0x91232fff 64bit]
pci 0000:00:1f.0: [8086:5ae8] type 00 class 0x060100
pci 0000:00:1f.1: [8086:5ad4] type 00 class 0x0c0500
pci 0000:00:1f.1: reg 0x10: [mem 0x91234000-0x912340ff 64bit]
pci 0000:00:1f.1: reg 0x20: [io 0x1040-0x105f]
pci 0000:00:13.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [8086:095a] type 00 class 0x028000
pci 0000:02:00.0: reg 0x10: [mem 0x91100000-0x91101fff 64bit]
pci 0000:02:00.0: can't set Max Payload Size to 256; if necessary, use "pci=pcie_bus_safe" and report a bug
pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
pci 0000:02:00.0: System wakeup disabled by ACPI
pci 0000:00:13.2: PCI bridge to [bus 02]
pci 0000:00:13.2: bridge window [mem 0x91100000-0x911fffff]
pci 0000:00:14.0: PCI bridge to [bus 03]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 *15), disabled.
ACPI: Enabled 5 GPEs in block 00 to 7F
ACPI : EC: interrupt unblocked
ACPI : EC: event unblocked
ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x2b, EC_CMD/EC_SC=0x66, EC_DATA=0x62
ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and events
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Registered efivars operations
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
e820: reserve RAM buffer [mem 0x00086000-0x0008ffff]
e820: reserve RAM buffer [mem 0x68b95000-0x6bffffff]
e820: reserve RAM buffer [mem 0x6b81d018-0x6bffffff]
e820: reserve RAM buffer [mem 0x7822f000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7b000000-0x7bffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 19.200000 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [io 0x0680-0x069f] has been reserved
system 00:00: [io 0x0400-0x047f] could not be reserved
system 00:00: [io 0x0500-0x05fe] has been reserved
system 00:00: [io 0x0600-0x061f] has been reserved
system 00:00: [io 0x164e-0x164f] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:02: Plug and Play ACPI device, IDs ETD050a SYN1b00 SYN0002 PNP0f13 (active)
system 00:03: [mem 0xe0000000-0xefffffff] could not be reserved
system 00:03: [mem 0xfea00000-0xfeafffff] has been reserved
system 00:03: [mem 0xfed01000-0xfed01fff] has been reserved
system 00:03: [mem 0xfed03000-0xfed03fff] has been reserved
system 00:03: [mem 0xfed06000-0xfed06fff] has been reserved
system 00:03: [mem 0xfed08000-0xfed09fff] has been reserved
system 00:03: [mem 0xfed80000-0xfedbffff] has been reserved
system 00:03: [mem 0xfed1c000-0xfed1cfff] has been reserved
system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp: PnP ACPI: found 5 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:13.0: PCI bridge to [bus 01]
pci 0000:00:13.2: PCI bridge to [bus 02]
pci 0000:00:13.2: bridge window [mem 0x91100000-0x911fffff]
pci 0000:00:14.0: PCI bridge to [bus 03]
pci_bus 0000:00: resource 4 [io 0x0070-0x0077]
pci_bus 0000:00: resource 5 [io 0x0000-0x006f window]
pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window]
pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x7c000001-0x7fffffff window]
pci_bus 0000:00: resource 9 [mem 0x7b800001-0x7bffffff window]
pci_bus 0000:00: resource 10 [mem 0x80000000-0xcfffffff window]
pci_bus 0000:00: resource 11 [mem 0xe0000000-0xefffffff window]
pci_bus 0000:02: resource 1 [mem 0x91100000-0x911fffff]
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:00:15.0: xHCI BIOS handoff failed (BIOS bug ?) 00012201
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 43380K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x71db1000-0x75db1000] (64MB) mapped at [ffff930131db1000-ffff930135db0fff]
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xfc66f4fc7c, max_idle_ns: 440795224246 ns
clocksource: Switched to clocksource tsc
Scanning for low memory corruption every 60 seconds
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1514301796.267:1): initialized
Initialise system trusted keyrings
workingset: timestamp_bits=36 max_order=20 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:13.0: Signaling PME with IRQ 122
pcieport 0000:00:13.2: Signaling PME with IRQ 123
pcieport 0000:00:14.0: Signaling PME with IRQ 124
efifb: probing for efifb
efifb: framebuffer at 0x80000000, using 8100k, total 8100k
efifb: mode is 1920x1080x32, linelength=7680, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 240x67
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x11242020
intel_idle: v0.4.1 model 0x5C
intel_idle: lapic_timer_reliable_states 0xffffffff
ACPI: AC Adapter [AC0] (on-line)
input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input0
ACPI: Sleep Button [SLPB]
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ01] (30 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [THRM] (0 C)
GHES: HEST is not enabled!
Linux agpgart interface v0.103
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:15.0: xHCI Host Controller
xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 1
xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 quirks 0x01109810
xhci_hcd 0000:00:15.0: cache line size of 64 is not supported
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 4.10.0-42-generic xhci-hcd
usb usb1: SerialNumber: 0000:00:15.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
xhci_hcd 0000:00:15.0: xHCI Host Controller
xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 4.10.0-42-generic xhci-hcd
usb usb2: SerialNumber: 0000:00:15.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 7 ports detected
usb: port power management may be unreliable
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
i8042: Detected active multiplexing controller, rev 1.1
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
ACPI: Battery Slot [BAT0] (battery present)
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:04: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 7c ' to make it known.
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
intel_rdt: Intel RDT L2 allocation detected
microcode: sig=0x506c9, pf=0x1, revision=0x26
microcode: Microcode Update Driver: v2.2.
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 08f7e76e35960ddc5f58d339c2ab190bcc4bf201'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
evm: HMAC attrs: 0x1
Magic number: 13:405:387
thermal cooling_device2: hash matches
rtc_cmos 00:04: setting system clock to 2017-12-26 15:23:17 UTC (1514301797)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 2228K
Write protecting the kernel read-only data: 14336k
Freeing unused kernel memory: 1156K
Freeing unused kernel memory: 268K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: udevadm: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
random: systemd-udevd: uninitialized urandom read (16 bytes read)
FUJITSU Extended Socket Network Device Driver - version 1.2 - Copyright (c) 2015 FUJITSU LIMITED
wmi: Mapper loaded
hidraw: raw HID events driver (C) Jiri Kosina
[drm] Initialized
ahci 0000:00:12.0: version 3.0
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 7c ' to make it known.
ahci 0000:00:12.0: AHCI 0001.0301 32 slots 1 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:12.0: flags: 64bit ncq sntf pm clo only pmp pio slum part deso sadm sds apst
scsi host0: ahci
ata1: SATA max UDMA/133 abar m2048@0x91233000 port 0x91233100 irq 371
sdhci-pci 0000:00:1c.0: SDHCI controller found [8086:5acc] (rev b)
mmc0: SDHCI controller on PCI [0000:00:1c.0] using ADMA 64-bit
sdhci-pci 0000:00:1e.0: SDHCI controller found [8086:5ad0] (rev b)
mmc1: SDHCI controller on PCI [0000:00:1e.0] using ADMA 64-bit
[drm] Memory usable by graphics device = 4096M
checking generic (80000000 7e9000) vs hw (80000000 10000000)
fb: switching to inteldrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] Finished loading i915/bxt_dmc_ver1_07.bin (v1.7)
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] GuC firmware load skipped
usb 1-5: new full-speed USB device number 2 using xhci_hcd
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[drm] Initialized i915 1.6.0 20161121 for 0000:00:02.0 on minor 0
atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 7c ' to make it known.
usb 1-5: New USB device found, idVendor=8087, idProduct=0a2a
usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
usb 1-6: new high-speed USB device number 3 using xhci_hcd
atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 7c ' to make it known.
usb 1-6: New USB device found, idVendor=0bda, idProduct=0129
usb 1-6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-6: Product: USB2.0-CRW
usb 1-6: Manufacturer: Generic
usb 1-6: SerialNumber: 20100201396000000
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-9: HFS128G39TND-N210A, 30001P10, max UDMA/133
ata1.00: 250069680 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA HFS128G39TND-N21 1P10 PQ: 0 ANSI: 5
usb 1-7: new high-speed USB device number 4 using xhci_hcd
atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 7c ' to make it known.
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
sd 0:0:0:0: [sda] 4096-byte physical blocks
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
random: fast init done
usb 1-7: New USB device found, idVendor=04f2, idProduct=b5f7
usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-7: Product: HD WebCam
usb 1-7: Manufacturer: Chicony Electronics Co.,Ltd.
atkbd serio0: Unknown key released (translated set 2, code 0x7c on isa0060/serio0).
atkbd serio0: Use 'setkeycodes 7c ' to make it known.
usb 1-8: new full-speed USB device number 5 using xhci_hcd
usb 1-8: New USB device found, idVendor=1c7a, idProduct=0570
usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-8: Product: EgisTec Touch Fingerprint Sensor
usb 1-8: Manufacturer: EgisTec
usb 1-8: SerialNumber: W0090E85
usbcore: registered new interface driver rtsx_usb
[drm] RC6 on
psmouse serio4: synaptics: queried max coordinates: x [..5664], y [..4706]
psmouse serio4: synaptics: queried min coordinates: x [1276..], y [1148..]
psmouse serio4: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2a1, caps: 0xf00223/0x840300/0x12e800/0x0, board id: 3217, fw id: 2314823
input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input12
raid6: sse2x1 gen() 4971 MB/s
raid6: sse2x1 xor() 2990 MB/s
raid6: sse2x2 gen() 5748 MB/s
raid6: sse2x2 xor() 3489 MB/s
raid6: sse2x4 gen() 6540 MB/s
raid6: sse2x4 xor() 2764 MB/s
raid6: using algorithm sse2x4 gen() 6540 MB/s
raid6: .... xor() 2764 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: measuring software checksum speed
prefetch64-sse: 8391.000 MB/sec
generic_sse: 7522.000 MB/sec
xor: using function: prefetch64-sse (8391.000 MB/sec)
Btrfs loaded, crc32c=crc32c-intel
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Syslog Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on LVM2 metadata daemon socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Reached target Remote File Systems (Pre).
lp: driver loaded but no devices found
ip_tables: (C) 2000-2006 Netfilter Core Team
ppdev: user-space parallel port driver
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip6_tables: (C) 2000-2006 Netfilter Core Team
EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
systemd-journald[379]: Received request to flush runtime journal from PID 1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
idma64 idma64.0: Found Intel integrated DMA 64-bit
idma64 idma64.1: Found Intel integrated DMA 64-bit
idma64 idma64.2: Found Intel integrated DMA 64-bit
idma64 idma64.3: Found Intel integrated DMA 64-bit
idma64 idma64.4: Found Intel integrated DMA 64-bit
idma64 idma64.5: Found Intel integrated DMA 64-bit
idma64 idma64.6: Found Intel integrated DMA 64-bit
idma64 idma64.7: Found Intel integrated DMA 64-bit
random: crng init done
Intel(R) Wireless WiFi driver for Linux
Copyright(c) 2003- 2015 Intel Corporation
iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-26.ucode failed with error -2
iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-25.ucode failed with error -2
iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-24.ucode failed with error -2
iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-7265D-23.ucode failed with error -2
iwlwifi 0000:02:00.0: loaded firmware version 22.391740.0 op_mode iwlmvm
snd_hda_intel 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless AC 7265, REV=0x210
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC255: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0: inputs:
snd_hda_codec_realtek hdaudioC0D0: Mic=0x12
RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
RAPL PMU: hw unit of domain package 2^-14 Joules
RAPL PMU: hw unit of domain dram 2^-14 Joules
RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:0e.0/sound/card0/input13
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input14
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input15
input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:0e.0/sound/card0/input16
SSE version of gcm_enc/dec engaged.
Bluetooth: Core ver 2.22
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
media: Linux media interface: v0.10
Linux video capture interface: v2.00
EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
usbcore: registered new interface driver btusb
EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b5f7)
Bluetooth: hci0: read Intel version: 370810011003110e00
Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.8.10-fw-1.10.3.11.e.bseq
uvcvideo 1-7:1.0: Entity type for entity Extension 4 was not initialized!
uvcvideo 1-7:1.0: Entity type for entity Extension 3 was not initialized!
uvcvideo 1-7:1.0: Entity type for entity Processing 2 was not initialized!
uvcvideo 1-7:1.0: Entity type for entity Camera 1 was not initialized!
input: HD WebCam as /devices/pci0000:00/0000:00:15.0/usb1/1-7/1-7:1.0/input/input17
usbcore: registered new interface driver uvcvideo
USB Video Class driver (1.1.1)
intel_telemetry_core Init
intel_telemetry: version 1.0.0 loaded
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain core
intel_rapl: Found RAPL domain uncore
intel_rapl: Found RAPL domain dram
acer_wmi: Acer Laptop ACPI-WMI Extras
acer_wmi: Function bitmap for Communication Button: 0x801
acer_wmi: Enabling Launch Manager failed: 0xe4 - 0x0
input: Acer WMI hotkeys as /devices/virtual/input/input18
input: Acer BMA150 accelerometer as /devices/virtual/input/input19
audit: type=1400 audit(1514301806.703:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cups-browsed" pid=934 comm="apparmor_parser"
audit: type=1400 audit(1514301806.707:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=931 comm="apparmor_parser"
audit: type=1400 audit(1514301806.707:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=931 comm="apparmor_parser"
audit: type=1400 audit(1514301806.707:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=932 comm="apparmor_parser"
audit: type=1400 audit(1514301806.707:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=932 comm="apparmor_parser"
audit: type=1400 audit(1514301806.707:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=932 comm="apparmor_parser"
audit: type=1400 audit(1514301806.707:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=932 comm="apparmor_parser"
audit: type=1400 audit(1514301806.711:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/cups/backend/cups-pdf" pid=935 comm="apparmor_parser"
audit: type=1400 audit(1514301806.711:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd" pid=935 comm="apparmor_parser"
audit: type=1400 audit(1514301806.711:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/cupsd//third_party" pid=935 comm="apparmor_parser"
iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
Adding 4029948k swap on /dev/mapper/cryptswap1. Priority:-1 extents:1 across:4029948k SSFS
cgroup: new mount options do not match the existing superblock, will be ignored
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: BNEP socket layer initialized
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
iwlwifi 0000:02:00.0: L1 Enabled - LTR Enabled
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
wlp2s0: authenticate with 88:03:55:39:ea:7a
wlp2s0: send auth to 88:03:55:39:ea:7a (try 1/3)
wlp2s0: authenticated
wlp2s0: associate with 88:03:55:39:ea:7a (try 1/3)
wlp2s0: RX AssocResp from 88:03:55:39:ea:7a (capab=0x1411 status=0 aid=2)
wlp2s0: associated
IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
wlp2s0: Limiting TX power to 22 (22 - 0) dBm as advertised by 88:03:55:39:ea:7a
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
[UFW BLOCK] IN=wlp2s0 OUT= MAC= SRC=2003:00c8:cbcb:fa4c:58d7:504d:cd97:8bb1 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=599904 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[UFW BLOCK] IN=wlp2s0 OUT= MAC= SRC=2003:00c8:cbcb:fa4c:58d7:504d:cd97:8bb1 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=1008748 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[UFW BLOCK] IN=wlp2s0 OUT= MAC= SRC=2003:00c8:cbcb:fa4c:d174:727b:0990:e515 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=660904 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[UFW BLOCK] IN=wlp2s0 OUT= MAC= SRC=2003:00c8:cbcb:fa4c:d174:727b:0990:e515 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=156752 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[UFW BLOCK] IN=wlp2s0 OUT= MAC= SRC=fe80:0000:0000:0000:1159:e7e2:9fae:2736 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=581719 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[UFW BLOCK] IN=wlp2s0 OUT= MAC= SRC=fe80:0000:0000:0000:1159:e7e2:9fae:2736 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=551623 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[UFW BLOCK] IN=wlp2s0 OUT= MAC= SRC=2003:00c8:cbcb:fa4c:58d7:504d:cd97:8bb1 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=599904 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[UFW BLOCK] IN=wlp2s0 OUT= MAC= SRC=2003:00c8:cbcb:fa4c:58d7:504d:cd97:8bb1 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=1008748 PROTO=UDP SPT=8612 DPT=8610 LEN=24
[UFW BLOCK] IN=wlp2s0 OUT= MAC= SRC=2003:00c8:cbcb:fa4c:d174:727b:0990:e515 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=660904 PROTO=UDP SPT=8612 DPT=8612 LEN=24
[UFW BLOCK] IN=wlp2s0 OUT= MAC= SRC=2003:00c8:cbcb:fa4c:d174:727b:0990:e515 DST=ff02:0000:0000:0000:0000:0000:0000:0001 LEN=64 TC=0 HOPLIMIT=1 FLOWLBL=156752 PROTO=UDP SPT=8612 DPT=8610 LEN=24
nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based firewall rule not found. Use the iptables CT target to attach helpers instead.
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1203 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1204 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1209 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1210 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1211 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1212 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1213 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1214 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1215 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1216 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1217 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1218 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1219 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1220 PROTO=2
perf: interrupt took too long (2518 > 2500), lowering kernel.perf_event_max_sample_rate to 79250
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1221 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1222 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1223 PROTO=2
perf: interrupt took too long (3155 > 3147), lowering kernel.perf_event_max_sample_rate to 63250
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1224 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1225 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1226 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1227 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1228 PROTO=2
perf: interrupt took too long (3952 > 3943), lowering kernel.perf_event_max_sample_rate to 50500
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1229 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1230 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1231 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1232 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1233 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1234 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1235 PROTO=2
perf: interrupt took too long (5005 > 4940), lowering kernel.perf_event_max_sample_rate to 39750
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1236 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1237 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1238 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1239 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1240 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1241 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1242 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1243 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1244 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1245 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1246 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1247 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1248 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1249 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1250 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1251 PROTO=2
perf: interrupt took too long (6257 > 6256), lowering kernel.perf_event_max_sample_rate to 31750
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1252 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1253 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1254 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1255 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1256 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1258 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1259 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1260 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1261 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1262 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1263 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1264 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1265 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1266 PROTO=2
[UFW BLOCK] IN=wlp2s0 OUT= MAC=01:00:5e:00:00:01:88:03:55:39:ea:77:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=36 TOS=0x00 PREC=0x00 TTL=1 ID=1267 PROTO=2